Sandy City, UT Logo
File #: SUB08052021-006127    Version: 1 Name:
Type: Planning Item Status: Passed
File created: 11/8/2021 In control: Planning Commission
On agenda: 11/18/2021 Final action: 11/18/2021
Title: The Ridges at Dimple Dell (Preliminary Subdivision Review) 1405 East 10600 South [Community #22]
Attachments: 1. Staff report.pdf, 2. Vicinity map.pdf, 3. Planning Commission Letter 11.11.21.pdf, 4. The Ridges at Dimple Dell Plat.pdf, 5. Proof of notice- 1.pdf, 6. Proof of notice- 2.pdf
Related files: SPR#04-31, SPX11112021-006204, SPR08032021-006125
Agenda Item Title:

Title

The Ridges at Dimple Dell

(Preliminary Subdivision Review)

1405 East 10600 South

[Community #22]

Body

Presenter:

Mike Wilcox

Body

Description/Background:

Brad Reynolds Construction has submitted an application for a subdivision review for the Ridges at Dimple Dell, located at 1405 East 10600 South. This proposal would create a pad lot for the 49 townhome units and a lot for the commercial building and it’s associated parking on approximately six (6) acres.

A full detailed staff report is attached hereto for further information.

Recommended Action and/or Suggested Motion:

Recommendation

Staff recommends that the Planning Commission determine that the Preliminary Subdivision review is complete for the Ridges at Dimple Dell located at approximately 1405 East 10600 South, based upon the following findings and subject to the following conditions:

Findings:

1.                     The proposed plat meets all underlying requirements of the MU zone.

2.                     That the various City Departments and Divisions have preliminarily approved the proposed subdivision plat.

Conditions:

1.                     That the applicant complies with each department’s comments and redlines throughout the final review process and that all issues be resolved before the subdivision can be recorded.

2.                     That all City provisions, codes, and ordinances are adhered to during the review, construction and operations process of this project.

3.                     That all protected slope areas are properly shown on the plat (including areas within 20-30’ from the property line).

4.                     That all lots comply with all requirements of the Sensitive Area Overlay Zone, including that all buildings must be set back at least an average of 20 feet from any 30 percent or greater slope areas, with no part being located closer than 10 feet to it. That units 14 and 15 pad site areas be re...

Click here for full text